The dipstick is a long and flat metal rod or a strip with a plastic ring handle,The rod was reching to the engine oil pan. Its primary purpose is to indicate the oil level inside the engine, but it does more than that. The dipstick can tell you about the condition of the oil. Also, it can give you an idea of the internal health of the engine. If the level of the oil is between the two lines, your vehicle has enough oil
Fluid Level Indicator (FLI) product line is ideally suited for a wide range of engine, transmission and other applications
Function oil level measure gauge can be divided into Engine oil dipstick transmission oil diptisck
Material oil gauge dispstick can be made by plastic abs steel metal plate or strip CNC metal part
How to check oil level
The oil level on a dipstick reflects the amount of oil in the oil pan, which is the reservoir that holds the oil when the engine is not running. When the engine is running, some of the oil is circulated through the engine to lubricate, cool, and clean the moving parts. This means that the oil level in the oil pan will drop slightly when the engine is on, and rise back up when the engine is off.
Production workshop
An automotive molder was molding and assembling an Oil Level Dipstick consisting of a blade and finger ring.
Engine oil dipstick finger ring injection by plastic or ABS.
1.Blanking the steel blade for oil dipstick
2.Laser marking the max and minx ready
3.Put the dipstick blade into the injection plastic mold
This was how the oil disptick assemble by the plastic and steel blade .Normally the steel blade was adopt by the stainless steel.
The oil level gauge fully made by the plastic injection
1.Made the mold for the oil measure .
2.Mark the max and min level within the mold
3.Turn on the press and wait for the injection plastic completed.
Free burr flash on the handle of the oil dipstick
This shape defect is formed when molten plastic enters into and solidifies in the mold (male and female mold) parting line or gaps around the ejection pins
So we need to take the burr off incase it cause the hurt after sale.
The mark of the oil dipstick by laser mark
1.Set the blade of steel at drawing require dimension
2.one end of the blade get in touch with the mold
3.Laser marking the customized mark inculding the max and min on oil dipstick
To improve the oil level gauge measure pull strength we set a pin into the plastic handle and blade.
Improve drawing force between plastic handle and dipstick blade
Oil dipstick can be customized ,the stamping mark of the max and min sometimes seizing the end the oil dipstick tube,to improve that we use he laser marking instead of the stamping mark.
We thought as a customer think and think beyond the image before kick off the production and just assemble the handle and blade
The oil disptick ready to be inspection before packing,we do the inspection according to the work instruction from the customer sample of drawing.
We carry out the PPAP and APQP procedure,this was the require from the quality management system TS 16949.
Engine oil dipstick tube production workshop
Brazing welding workhop: To give out better performance of the bypass tube ,EGR tube ,cylinder inlet pipe we use the brazing copper welding pipe instead of shield welding.
We fully carry out the TS 16949 quanlity management system with manufactory.Start from raw material incoming inspection to container loading .
Continuous improvemnet:ACT-PLAN-DO -CHECK
1.Brazing for seamless tube Copper braze paste CU 103-BS EN ISO 17672
2.The cylinder inlet water ,engine water pump pipe ,EGR pipe ,auto air conditionging tube was connect all the part by brazing or called copper welding .
Bending workshop:To give out the best bending service for the bending pipe ,The bending pipe production was completed by the CNC bending machine or stamping machine ,to make each conner perfect withou winkle.
We use the CNC bending machine to bending the tube for Engine Water Pump inlet Pipe, water pump to cylinder pipe ,Engine Coolant Bypass Pipe,thermostat to engine cyliner,Engine cylinder inlet pipe,Engine heater water pipe ,EGR pipe tube ,Engine pump pipe,Car air conditioning tube
Tube Bending:Tube bending is at the core of our capabilities, we have in excess of 60 CNC tube bending machines across the group with the ability to bend tubes in diameters from ø4mm up to ø152mm.
We have several state-of-the-art multi-stack CNC bending machines which allow us to produce complex compound bends where there is very little straight length of tube between bends. This is often seen in automotive applications where there are very tight package spaces for tubes to be routed through.
End Forming / Beading:We can produce all different kind types of beaded end form on tube, from single beads for the attachment of hoses and double beads to allow for a hard stop for a hose joint. We also produce complex Quick Connector end forms for the attachment of snap fit plastic Quick Connectors and rolled end forms which have a very tight tolerance and are used to join to applications such as turbochargers.
Water coolant pipe bracket stamping workshop
Metal stamping is essential for forming materials like steel, copper, and brass into components like terminals, connectors, wire forms, and brackets in the automotive sector. It ensures that car parts are robust while providing speed, accuracy, and cost-effectiveness. It does, however, have restrictions, such as limits on material thickness. Metal stamping is essential to the production of automobiles since stamped parts are essential for a vehicle's strength and safety.
Dipstick tube bracket,cylinder water inlet pipe bracket
Leaking test workshop:Use air pressure to keep it within 30 second to inspection the cylinder water inlet pipe sealing
Quality control-Pipe leaking test
1.Each pipe go though air decay leak test [email protected]/Min
2.Engine pump Pipe ship to plant or service part package free of any corrosion aligned with the Ford customer service
4.water coolant pipe clean conform to ES7T4E-6B616-AA,cleanliness extraction efficiency requirement is 60% Min.
5.Engine collant Tube steel EN10305-3 E220 CR2 S3
6.Engine water coolant by pass water pipe Bracket steel 3.0THK SAE J403 UNS G10080 OR G10100 0.2% C MIN
7.Inspection of engine coolant pipe ,each tube go though the NDA inspection ,some of them go by the X ray inspection to check the seam of the tube and pick out the leaking pipe.
Raw material
Seamless steel tube pipe raw material inspection
Seamless steel tube pie inspection
Seamless steel tube pipe inspection before put into mass production
1. Seamless tube material :Most of the pipe was make by the metal steel and source it from the market ,our raw material come directly from the seamless tube factory
2. Raw material :our seamless tube pipe come directly from the seamless tube factory with certificate.
3.Mechanical Properties,Only tensile strength, yield strength and elongation of raw materials meet the requirements can move into mass productions.
Company Profile
We focus on the stamping forming bending welding part for almost 30 years.Founded in 1992, Started exporting in 2008, which is now covered more than 10000 square meters and with 439 employee.We were the first tire of the OEM supplier for VW TOYOTA HONDA FORD in China,Customer first:We control the quality by APQP,PPAP
Our business focus on the Engine Water Pump inlet Pipe , Coolant Bypass Pipe,cylinder pipe,heater water pipe,EGR pipe tube,Engine coolant pipe,
We were supply the Engine water pump pipe for a lot of application such as auto engine cooling system and the others ,We also support the after market service.MOQ is also ok for us The engine cooling system container a lot of pipe :
Product Description
| 1.Engine Water Pump inlet Pipe,for water pump to cylinder |
2.Engine Coolant Bypass Pipe,thermostat to engine cyliner |
| 3.Engine cylinder inlet pipe,Engine heater water pipe |
4.EGR pipe tube ,Engine pump pipe,Car air conditioning tube |
1.Engine Water Pump inlet Pipe,for water pump to cylinder
2.Engine Coolant Bypass Pipe,thermostat to engine cyliner
3.Engine cylinder inlet pipe,Engine heater water pipe
4.EGR pipe tube ,Engine pump pipe,Car air conditioning tube
5.Engine oil dipstick and dipstick guide tube
Oil Gauge Assembly M18x11.5
John Deere Original Equipment Dipstick - AM127176,1 Fits Tractor
Engine Oil Level Dipstick
- Total Length: 59.3cm/23.3"(approx)
- Type: Oil Dipstick
- Material: Metal, Plastic
- Color:Orange
Transmission Oil Level Dipstick, Transmission Oil Level Dipstick
Racing Transmission Dipstick and tube ,Trick Loc ,Steel/Plastic lock
Most of the dipsticks feature a locking stick that satisfies sanctioning bodies' racing rules. The rubber boot seal is a vast improvement over the small o-ring typically used on older OEM tube designs
Engine Fuel Dipstick, Fuel Level Measure Strictly Follow Factory Quality Control Good Reliability Oil Level Measure Durable
Measure the height of the static liquid level of the engine oil, reflect whether the engine oil stock is within a reasonable range
1. Quality material makes it firm, corrosion resistant and durable.
2. Professional manufacturing, high precision, good reliability.
3. Measure the height of the static liquid level of the engine oil, reflect whether the engine oil stock is within a reasonable range.
Engine Oil Level Indicator Dipstick
1.Package Includes: 1 x Oil Dipstick
2.Item Total Length: 745mm / 29.33 inches
3.Length ( Exclude Handle): 680mm / 26.77 inches
4.replacement for the broken or bad engine oil dip sticks, quality materials used, meets or exceeds OEM standards,
100% rigorously tested before shipping.
Clear marks on the rod promise easy-to-read oil levels
Audited Supplier 
){kind=link}