| Notes |
Year |
Make |
Model |
Trim |
Engine |
| |
2011 |
Chevrolet |
Aveo |
Base Sedan 4-Door |
1.6L 1598CC 98Cu. In. l4 GAS DOHC Naturally Aspirated |
| |
2011 |
Chevrolet |
Aveo |
LS Sedan 4-Door |
1.6L 1598CC 98Cu. In. l4 GAS DOHC Naturally Aspirated |
| |
2011 |
Chevrolet |
Aveo |
LT Sedan 4-Door |
1.6L 1598CC 98Cu. In. l4 GAS DOHC Naturally Aspirated |
| |
2011 |
Chevrolet |
Aveo5 |
LS Hatchback 4-Door |
1.6L 1598CC 98Cu. In. l4 GAS DOHC Naturally Aspirated |
| |
2011 |
Chevrolet |
Aveo5 |
LT Hatchback 4-Door |
1.6L 1598CC 98Cu. In. l4 GAS DOHC Naturally Aspirated |
| |
2010 |
Chevrolet |
Aveo |
Base Sedan 4-Door |
1.6L 1598CC 98Cu. In. l4 GAS DOHC Naturally Aspirated |
| |
2010 |
Chevrolet |
Aveo |
LS Sedan 4-Door |
1.6L 1598CC 98Cu. In. l4 GAS DOHC Naturally Aspirated |
| |
2010 |
Chevrolet |
Aveo |
LT Sedan 4-Door |
1.6L 1598CC 98Cu. In. l4 GAS DOHC Naturally Aspirated |
| |
2010 |
Chevrolet |
Aveo5 |
LS Hatchback 4-Door |
1.6L 1598CC 98Cu. In. l4 GAS DOHC Naturally Aspirated |
| |
2010 |
Chevrolet |
Aveo5 |
LT Hatchback 4-Door |
1.6L 1598CC 98Cu. In. l4 GAS DOHC Naturally Aspirated |
| |
2009 |
Chevrolet |
Aveo |
Base Sedan 4-Door |
1.6L 1598CC 98Cu. In. l4 GAS DOHC Naturally Aspirated |
| |
2009 |
Chevrolet |
Aveo |
LS Sedan 4-Door |
1.6L 1598CC 98Cu. In. l4 GAS DOHC Naturally Aspirated |
| |
2009 |
Chevrolet |
Aveo |
LT Sedan 4-Door |
1.6L 1598CC 98Cu. In. l4 GAS DOHC Naturally Aspirated |
| |
2009 |
Chevrolet |
Aveo5 |
LS Hatchback 4-Door |
1.6L 1598CC 98Cu. In. l4 GAS DOHC Naturally Aspirated |
| |
2009 |
Chevrolet |
Aveo5 |
LT Hatchback 4-Door |
1.6L 1598CC 98Cu. In. l4 GAS DOHC Naturally Aspirated |
Production description
We were supply the pipe for a lot of application such as auto engine cooling system and the others ,We also support the after market service.MOQ is also ok for us
Quality control
1.Each part go go though air decay leak test
[email protected]/Min
2.Copper braze paste CU 103-BS EN ISO 17672
3.Part ship to plant or service part package free of any corrosion aligned with the Ford customer service
4.Part clean conform to ES7T4E-6B616-AA,cleanliness extraction efficiency requirement is 60% Min.
5.Tube steel EN10305-3 E220 CR2 S3
6.Bracket steel 3.0THK SAE J403 UNS G10080 OR G10100 0.2% C MIN
Customer first:
We control the quality by APQP,PPAP
CONCEPT:Why does it always seem that we have plenty of time to fix our problems once they occur, but never enough time to prevent the problems from happening by doing it right the first time? That was why we PFEMA and HISTORY LEARNING first for all the project.
Thanks to our customer the recourse we were standing here today
We focus on the stamping forming bending welding part for almost 30 years.
Founded in 1992, Started exporting in 2008, which is now covered more than 10000 square meters and with 439 employee.
We fully carry out the TS 16949 quanlity management system with manufactory.Start from raw material incoming inspection to container loading .
Continuous improvemnet:ACT-PLAN-DO -CHECK
Raw material incoming inspection :
Raw material incoming inspection :
1.Five element analyzer
Automatic five element analyzer carbon sulfur manganese silicon phosphorus chemical element spectrum analyzer
Any type of the element out of specification will Affecting mechanical properties
Raw material incoming inspection :
2.Mechanical Properties
Only tensile strength, yield strength and elongation of raw materials meet the requirements can move into mass productions.
Decoiler
We bought the raw material by coil from the steel company ,we decoiler the steel sheet by ourslef ,which will save the cost and lead time for mass productions.
Laser cutting for the steel sheet
When produce the sample or the small batch of the product we normally use the laser cutting insted of the stamping blanking.
Tooling mold Prepare
We simulated the workpiece by J-STAMPING software ,then we design the mold for metal sheet part ,not only it short the leadtime for development but also saving the cost for customer.
Mold Workshop Warehouse
We can design and manufacture molds according to customer requirements,2500 square meter special for stamping mold warehouse.
CNC machining center
We introduce 5pcs of CNC machine ,all of them with 5 Axis not only they can produce the mold and tooling but also they can carry out some part of machine job.
The capacity of the CNC machine was :25000*1800*1000mm
Stamping Workshop
Overview of the Stamping workshop with cover the
Stamping equipment from 100T to 800T.
Hydraulic Press cover from 50T to 3100T.
With the mold(die,tooling) produce by ourselves we can customize all kinds of metal shape according to customer drawing call out.
Metal sheet bending by machine without mold or tooling help by press or stamping machine
Bending Workshop
CNC bending machine with servo control precise control the tolerance according to customer requirement.
The capacity of bending diameter reach to Φ135mm.
Welding Workshop
Welding robot with Synchronous workstation introduce from Panasonic Japan ,we had 23pcs welding arm with 64 pcs working stations,sheild welding support by Continuous gas supply station.
Brazing Welding For Pipe
Pipe with brazing welding can get perfect out appearance also reduce leaking on welding area.
Spot Welding (Resistance welding)
The ABB resistance welding robot can improve the welding joint strength also Improve spot welding efficiency.Reduce defects of traditional spot welding.
Surface Treatment
The coating line improves the efficiency, reduces the pollution to the environment, and the wastewater discharge after industrial treatment reaches the national standard.
Salt and spry test
Each batch of the surface treatment should go though the test before packing and shipment
Inspection tooling calibration by CMM
The inspecion calibration was a key job to ensure the quality of working piece.
Dimension Inspection
The mold and inspect gauge also the PPAP part was inspect by the CMM and Handy scanning equipment.
ERP System In Our Company
All data support by ERP System, Cover From Raw Material Incoming To Shipment.
Customer Audit
* Evaluate the quality of customer service.
* Compare the quality with previously established goals.
* Identify gaps for improvement.
* Find ways to improve customer service.
* Gather all of the required data with Live Agent.
* Check activities.
Audited Supplier 
Thanks to our customer the recourse we were standing here today
){kind=link}